Koch-Chemie Micro Cut & Finish P3.01 & Hologram Remover with Carnauba 250ml
- Cut: 3,2
- Gloss: 9,5
- Removes streaks, fine scratches, and sanding marks up to 3,000-grain size and provides a long-term sealing effect
- Creates an ideal high gloss finish even on dark surfaces
- The paintwork of cars, commercial vehicles, motorcycles, etc.
Ā
For optimum results, we recommend using ourĀ Micro Cut PadĀ and an orbital polisher with forced rotation (e.g. Makita PO5000C, highest speed). Alternatively, a rotary polisher can be used with our Micro Cut Pad. Before use, moisten dried or new pads completely with polish. With the machine switched off, apply the polish evenly over the surface to be treated and then polish crosswise with medium pressure thoroughly. Afterwards, polish with low pressure. Do not use pads used with this product for other products. For non-scratch and groove-free removal of polish residues, we recommend our non-chain stitched Profi microfibre cloth that has been ultrasonically cut.
Ā
Shake before using. Before using, check suitability and compatibility. Do not use it on hot surfaces. Protect against frost and excessive heat.
Ā
This product information can advise you only without obligation. Liability on our part can not be derived. Please, check whether the product is suitable for your application. We will be pleased to assist you.
Ā
MSDS DOWNLOAD
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
- Cut: 3,2
- Gloss: 9,5
- Removes streaks, fine scratches, and sanding marks up to 3,000-grain size and provides a long-term sealing effect
- Creates an ideal high gloss finish even on dark surfaces
- The paintwork of cars, commercial vehicles, motorcycles, etc.
Ā
For optimum results, we recommend using ourĀ Micro Cut PadĀ and an orbital polisher with forced rotation (e.g. Makita PO5000C, highest speed). Alternatively, a rotary polisher can be used with our Micro Cut Pad. Before use, moisten dried or new pads completely with polish. With the machine switched off, apply the polish evenly over the surface to be treated and then polish crosswise with medium pressure thoroughly. Afterwards, polish with low pressure. Do not use pads used with this product for other products. For non-scratch and groove-free removal of polish residues, we recommend our non-chain stitched Profi microfibre cloth that has been ultrasonically cut.
Ā
Shake before using. Before using, check suitability and compatibility. Do not use it on hot surfaces. Protect against frost and excessive heat.
Ā
This product information can advise you only without obligation. Liability on our part can not be derived. Please, check whether the product is suitable for your application. We will be pleased to assist you.
Ā
MSDS DOWNLOAD
